When enterprises plan to manufacture and sell Class II medical devices in China, they are usually required to obtain a Medical Device Registration Certificate first. However, many enterprises that are new to the registration process often have questions: which authority should they submit the application to? What documents need to be prepared? Do all products need to undergo clinical trials? And once they have the registration certificate, can they directly start production and sales?
In accordance with the Regulations on the Supervision and Administration of Medical Devices and the Measures for the Administration of Medical Device Registration and Filing, medical devices in China are categorized into Class I, Class II and Class III based on their risk levels. Among them, Class I devices are subject to filing management, while Class II and Class III devices are subject to registration management. Domestic Class II medical devices are under the charge of the provincial drug administration department at the location of the enterprise for registration and approval, and imported Class II medical devices are managed by the National Medical Products Administration.
Confirm product classification and registration subject before application
Enterprises need to confirm whether the product falls into the category of Class II medical devices in accordance with the Medical Device Classification Catalogue and relevant classification rules, and clarify the product name, intended use, structural composition, working principle, model specifications and scope of application. If the product classification is unclear, an application for medical device classification definition can be submitted according to the actual situation.
For example, even for medical devices of the same broad category, differences in functions, working principles and intended uses will lead to different corresponding regulatory classes, testing standards and clinical evaluation requirements. Even for products in the same series, if there are significant differences in structure, performance or scope of application between different models, it is necessary to assess whether they can be included in the same registration unit.
After the product classification is determined, the relationship between the registration applicant and the actual manufacturing enterprise also needs to be clarified. Enterprises can legally adopt methods such as self-production or entrusted production, but the registration applicant must establish a quality management system compatible with the product, and take responsibility for the safety, effectiveness and quality controllability of the product.
It should be noted that the Medical Device Registration Certificate and the Medical Device Production License are two separate regulatory matters. Obtaining the product registration certificate does not mean that the enterprise has automatically obtained the production license for Class II medical devices. Before carrying out actual production activities, it is still necessary to complete procedures such as applying for the production license in accordance with applicable regulations.
To what extent should the registration documents be prepared?
The documents required for Class II medical device registration mainly include product technical requirements, product testing reports, product risk analysis documents, clinical evaluation documents, draft instructions for use and labels, product research documents, as well as quality management system documents related to product development and production.
Among them, the product technical requirements are a critical foundation. Enterprises need to define applicable performance indicators, safety indicators and testing methods based on the product's structure, functions and intended use, and ensure that relevant requirements can be evaluated through reasonable testing or verification methods.
For example, for active medical devices, electrical safety, electromagnetic compatibility, software verification and performance research may need to be carried out according to product characteristics; for medical consumables that come into contact with the human body, items such as biocompatibility, material safety, sterilization validation, packaging and shelf-life research may be involved. The items to be carried out for different products are not exactly the same, and should be determined in combination with applicable standards and corresponding registration review guidelines.
The product testing report can be completed through self-inspection by the registration applicant with corresponding qualifications in accordance with regulations, or entrusted to a qualified medical device testing institution. Whichever method is adopted, it is necessary to ensure that the test results are true and accurate, and can correspond to the product model, structure and technical requirements actually declared in the application.
Clinical evaluation is also a content that needs to be confirmed in advance during the registration process. Not all Class II medical devices are required to undergo clinical trials. Products that meet the conditions for exemption from clinical evaluation can be legally exempted; for other products, corresponding clinical evaluation evidence needs to be formed through methods such as clinical data of equivalent medical devices, clinical literature or clinical trials in accordance with applicable requirements.
If the existing data is insufficient to prove the safety and effectiveness of the product, the enterprise may need to carry out further clinical research. Therefore, when preparing registration documents, the clinical evaluation path should be confirmed as early as possible, to avoid the situation where necessary clinical evidence is still missing after the product has completed testing.
How to submit the registration application after document preparation is completed?
For domestic Class II medical devices, enterprises need to submit the registration application through the corresponding government service channels in accordance with the requirements of the provincial drug administration department where they are located.
After the application is submitted, the regulatory authority will first conduct an acceptance review. Applications with complete documents and meeting the statutory form will be accepted; those with incomplete documents or failing to meet the requirements will need to be supplemented in accordance with the notification.
After formal acceptance, the registration application enters the technical review stage. The review agency will combine the product risks, technical requirements, test reports, clinical evaluation and other research documents to judge whether the evidence provided by the enterprise is sufficient to prove that the product is safe, effective and quality-controllable.
During the review process, if it is found that the documents are insufficient, some studies lack supporting basis, or there are inconsistencies between the documents, the enterprise may be required to submit supplementary materials as required.
At the same time, the regulatory authority may also conduct a quality management system inspection for registration, focusing on verifying whether the enterprise has established a quality management system compatible with the product, and whether the activities of R&D, production, testing and quality control comply with the regulations.
After the technical review and relevant inspections are completed, the provincial drug administration department will make an approval decision in accordance with the law. If the registration requirements are met, the Medical Device Registration Certificate will be issued.
What issues are most likely to delay the progress of applying for Class II medical device registration?
In actual applications, enterprises need to pay special attention to the consistency among product classification, technical requirements, test reports and clinical evaluation documents.
For example, the product instructions for use claim a certain function, but there is a lack of corresponding evidence in the product technical requirements and research documents; there are performance differences between different models, but the basis for the division of registration units is not fully explained; the product has been modified in design or software version, but the test report and risk management documents have not been updated synchronously.
All these situations may affect the subsequent technical review.
In addition, some enterprises focus their attention on product testing and registration document sorting, but neglect the construction of the quality management system. In fact, the registration applicant needs to establish a quality management system compatible with the product before submitting the application, and be prepared to undergo relevant inspections. A set of application documents organized only by external institutions cannot replace the quality management responsibility that the enterprise itself needs to assume.
For medical device enterprises planning to expand overseas business, the domestic registration certificate is only part of the enterprise's product compliance documents. After obtaining the NMPA registration certificate, if they plan to export to markets such as the EU, the United States, the Middle East or Southeast Asia, they still need to confirm the corresponding product classification, market access and registration requirements in accordance with the medical device regulations of the target countries.
On professional medical and medical device B2B platforms such as Drugdu.com, when enterprises showcase their products, they can accurately state the obtained Medical Device Registration Certificate, applicable product models, product technical parameters and relevant quality documents, so that overseas purchasers can understand the actual compliance status of the products.
However, it should be noted that the domestic medical device registration certificate cannot directly replace the marketing authorization for overseas markets, and enterprises should not describe certificates that are still in the application process as already obtained.
In general, to apply for Class II medical device registration, enterprises first need to confirm the product classification and application subject, then complete the preparation of product technical requirements, research and verification, product testing, clinical evaluation and quality management system, and then submit the application to the corresponding drug administration department. After going through acceptance, technical review, necessary document supplementation and system inspection, the registration certificate can be legally obtained.
For enterprises that are just starting to prepare for registration, it is recommended to prioritize clarifying the product classification, registration unit, applicable standards and clinical evaluation path. The more accurate the preliminary judgment is, the smoother the subsequent document preparation and technical review process will advance in an orderly manner.