November 11, 2026
Source: drugdu
32
Drugdu.com expert's respons:
When conducting overseas promotion for medical devices, many enterprises will inevitably face the issue of product iteration. For example, new models of patient monitors are launched, ultrasound devices get functional upgrades, endoscopes are equipped with updated image processing systems, or certain medical consumables have their specifications and packaging adjusted.
After new products are launched, enterprises usually prioritize uploading new model information, but the handling of old product pages previously published on B2B platforms is often overlooked.
Some enterprises directly delete old products, believing that there is no need to keep displaying them once production is discontinued. Others, considering that the old pages have accumulated a certain amount of views and search exposure, choose to keep them, even leaving them unchanged for a long time.
Both of these approaches have potential pitfalls that require attention. For medical devices, product pages not only affect whether overseas buyers can find the enterprise, but also involve model information, parameters, certification documents and actual supply status. If the information displayed on the page is inconsistent with the products the enterprise can currently provide, it may mislead buyers in their procurement decisions.
Is it still necessary to keep old product pages that already have views?
After a product has been displayed on a platform for a long time, it may have been indexed by search engines and accumulated browsing records from some overseas buyers. Even if the enterprise has launched a new model, some buyers may still find the original page by searching for the old product name or model number.
For instance, a medical device enterprise used to focus on promoting a certain patient monitor, and later launched an upgraded version, gradually phasing out the original model. However, some overseas distributors may still be looking for accessories for the old model, and some buyers will continue to search for the original model based on previous procurement records or product catalogs.
If the enterprise directly deletes the page, this group of buyers will not be able to find relevant information.
Therefore, for old models that have accumulated certain search traffic and still receive customer inquiries, it is advisable to retain appropriate product information, but the current supply status must be clearly stated.
For example, if the product has been discontinued, it can be marked as "Discontinued"; if there is already an alternative model, the name of the new model can be specified on the page, with a corresponding entry to the new product page.
This not only allows buyers to stay informed about product updates, but also reduces the chances of the enterprise missing communication opportunities due to incomplete historical product information.
That said, having views on an old page does not necessarily mean it is worth keeping permanently. If a product has been completely discontinued, with no remaining demand for accessories or after-sales services, and no suitable alternative product is available, maintaining a full "on-sale" page will only bring in mismatched inquiries.
After product upgrades, simply replacing images and model names is far from enough
Some enterprises, for the convenience of management, directly modify the title on the original product page, replacing the old model number with the new one, and only update a few images.
If the change only involves product name adjustment while the actual product structure, performance and intended use remain unchanged, the enterprise can assess whether updating the original page is appropriate based on specific circumstances.
However, if the new model involves major changes in core functions, hardware configurations, software versions, technical parameters or intended use, it is necessary to carefully verify all relevant product documents.
For example, after a patient monitor is upgraded with new monitoring functions, the enterprise needs to confirm that the newly added functions have completed corresponding verification, and that the product manual, technical materials and applicable certification documents cover the new model.
If an endoscopic device is equipped with a new image processing system, or an active medical device has its software functions upgraded, it is also necessary to confirm whether the relevant performance statements and technical documents are still applicable.
For medical devices exported to the EU, the MDR requires manufacturers to keep technical documentation and relevant registration information accurate. According to the UDI rules in MDR Annex VI, specific changes to the device version or model may even lead to the requirement to assign a new UDI-DI. Whether the model update affects existing certificates, conformity assessment and other regulatory obligations should be evaluated based on the actual changes.
Therefore, enterprises cannot simply reuse the CE-related documents, test reports or manuals of the old model on the new product page, assuming that these materials are still valid.
Especially when there are obvious differences between the old and new models, it is recommended to establish clear separate product records, to avoid overseas buyers confusing the parameters and documents of the two products.
Can an old model that has been discontinued still receive inquiries?
This needs to be judged based on the actual supply capacity of the enterprise.
Although some medical devices have stopped production, the enterprise still retains part of the inventory, or can provide accessories, maintenance and after-sales services. In this case, the old product page still has certain value.
For example, an overseas distributor previously purchased a certain model of monitor, and a few years later needs to buy matching batteries, sensors or other accessories. If the model can still be found on the platform, the supplier will have the opportunity to follow up on these related service demands.
However, it should be noted that being able to provide after-sales accessories does not mean that the enterprise can still supply the complete device.
If the enterprise has stopped producing the original model and can only provide some repair accessories, it must clearly state this on the page, to prevent buyers from mistakenly thinking that the model can still be normally procured.
Some enterprises that have completed product upgrades hope to guide customers to learn about the new version through the old model page. In this case, the main differences between the old and new models can be introduced, such as functional improvements, configuration changes, applicable scenarios or the scope of after-sales support, so that buyers can judge whether the new product meets their original procurement needs.
That said, the new model may not completely replace the old one. Especially when it comes to supporting hospital equipment, compatibility with existing systems, registered model numbers or specific procurement projects, buyers may need the original model, and cannot be directly recommended to switch just because the functions are similar.
From the perspective of overseas search promotion, old pages cannot be handled arbitrarily
For products that have been displayed on B2B platforms for a long time, their pages may have been indexed by search engines like Google. When updating products, in addition to confirming the actual supply status, enterprises also need to consider whether the old pages still have search value.
If the old model still has clear search demand, the page can be retained, but the discontinued or alternative status should be noted in the title and details, with a link to the new model.
If the old model has been completely replaced by a new model with corresponding functions and uses, and the old page no longer needs to be displayed independently, platforms with website management permissions can evaluate whether to set up a 301 permanent redirect to guide visitors to the new product page.
Google Search Central also suggests that for old URLs that have clear alternative pages, permanent redirects can be used; if there is no suitable alternative content for the old page, it should be handled according to the actual situation, instead of uniformly redirecting all invalid pages to the homepage or irrelevant product pages.
For suppliers on third-party B2B platforms, the availability of the redirect function depends on the technical support of the platform itself. If direct configuration is not possible, you can also update the description on the old page, add an entry for the new model, or contact the platform operation team for assistance.
It should be noted that in order to retain search exposure, enterprises should not use information of discontinued products to attract buyers for a long time, only to leave them disappointed when they find the products are actually unavailable. The views and inquiries obtained in this way are unlikely to lead to effective cooperation.
Which product pages should enterprises check regularly?
For enterprises that focus on medical devices, it is recommended to check the product information on the platforms synchronously when new models are launched, old models are discontinued, or relevant certifications change.
For example, an enterprise originally uploaded 30 types of medical devices, some of which have been upgraded, some have been phased out, and some models that are still on sale have updated certification documents or software versions.
If the original product catalog continues to be displayed, overseas buyers may see expired model information, or cannot distinguish the products that the enterprise is currently focusing on supplying.
For old models that are still on sale, they can be retained with accurate product parameters and document information maintained; for discontinued models that still have inquiry or after-sales value, necessary historical introductions can be kept while the supply status is clearly stated; for pages that have no practical value, they can be taken down, deleted or redirected to appropriate alternative pages in combination with platform functions and search performance.
On professional pharmaceutical and medical device B2B platforms such as Drugdu.com, suppliers can regularly check whether the product names, model specifications, images, parameters, certification documents and company introductions are consistent with their current business.
Especially for products with fast iteration speeds such as monitors, endoscopes, ultrasound devices and laboratory instruments, in addition to continuously uploading new models, it is also necessary to maintain existing product information in a timely manner.
If the enterprise is focusing on promoting upgraded products, it can prioritize improving the English titles, core parameters, applicable scenarios and relevant documents of the new models, and then arrange page adjustments based on the actual supply status of the old models.
There is no one-size-fits-all answer to whether old pages should be retained after product models are updated. Enterprises need to take into account the supply status of old products, after-sales demands, search traffic, and the actual relationship between the old and new models.
For overseas buyers, being able to clearly distinguish on-sale models, discontinued models and alternative products is more valuable than seeing a large number of product catalogs that have not been updated in time.
When carrying out continuous overseas promotion, in addition to adding new product displays, enterprises also need to maintain the published product information in a timely manner. Only by allowing buyers to find accurate model information, understand the current supply situation, and verify the corresponding certification and technical documents, can ineffective communications caused by outdated information be reduced.

your submission has already been received.
OK
Please enter a valid Email address!
Submit
The most relevant industry news & insight will be sent to you every two weeks.